Shanghai diesel engine motors Co., Ltd can supply the complete engine with mechanical clutch. If you are interested in our products, please feel free to contact us.
WPT Power Transmission,
A global manufacturer of heavy duty power transmission equipment, introduces
Of Mechanical Over-Center Power Take-Off Clutches
The WPT power take-off is suitable for inline and sideload applications on all internal combustion engines with standard SAE
Flywheel housing dimensions. All PTOs and parts are 100% interchangeable with existing PTOs. All units are supplied with sealed
Ball pilot bearings to eliminate lubrication problems normally encountered. Ball bearing throw-out collars are optional on 14° ± Units
And standard on 311 units. Please pay close attention to certain application criteria including speed, side load, and clutch torque.
Maximum Duty Service Classification
Maximum
Available Approx. Net
Input Torque Maximum Clutch Ratings HP
Model/ Speed
SAE Housing Weight
A
Lb-ft (Nm) (Kw)
B
Size rpm
Sizes lbs (kgs)
Class 2 Class 3 Class 4
Class 1
C107 6, 5, 4 177 (240) 57 (43) 38 (28) 28 (21) 3200 56 (25.4)
C108 5, 4, 3 230 (312) 68 (51) 45 (34) 34 (25) 3100 73 (33.1)
C110 4, 3, 2 329 (446) 98 (73) 65 (49) 49 (37) 3400 117 (53.1)
SP111 3, 2, 1 452 (613) 128 (95) 85 (63) 64 (48) 3200 143 (64.9)
SP211 3, 2, 1 904 (1 226) 255 (190) 170 (128) 128 (95) 3200 157 (71.2)
SP311 3, 2 1, 620 (2 200) 383 (286) 252 (188) 189 (141) 3200 223 (101.2)
SP114 1, 0 800 (1 085) 194 (145) 125 (93) 94 (70) 2400 263 (119.3)
SP214 1, 0 1, 600 (2 170) 388 (289) 252 (188) 190 (142) 2400 332 (150.6)
SP314 1, 0 2, 400 (3 255) 582 (434) 374 (279) 281 (210) 2400 413 (187.3)
A Horsepower (Kw) ratings may be
Increased with optional clutch plates.
B Contact WPT Engineering for
Applications requiring higher speeds.
C If in doubt of proper duty service class
To use consult WPT Engineering for
Application assistance. Attention must
Also be paid to the maximum speed
Rating and side load capacities in
Addition to clutch ratings. Clutch ratings
Are based on engagement at low idle
Speed and once engaged clutch must
Be engaged for at least one hour before
Disconnecting.