Brass bibcock with lock
Handle: Steel-chrome plated with plastic sleeve

Nominal Pressure: PN≤ 1.6Mpa
Applicable media: Water, gas, oil etc
Applicable temperature: T≤ 150ºC
Body: Brass-nickel plated

Technical Requirement:
Before assembling, all parts should be clean, no oil or grease, remove all burrs and sharp edges.
Before connecting, body cap male thread should be coated with sealing glue.
Handle turn or close freely.
After assembling, test by water at pressure no less than 0.8MPA, no leakage.