Model:HY923# silicone rubber
Tubes And Pipes For Injection Silicone Material of application
Tubes And Pipes For Injection Silicone Material is intended for statue mold making ,candles.
Tubes And Pipes For Injection Silicone Material is application for plastic toys, relieve furniture.
Tubes And Pipes For Injection Silicone Material is used for architectural decoration, funiture decorative.
Tubes And Pipes For Injection Silicone Material is application for sculpture, art crafts mold making and so on
Features of Tubes And Pipes For Injection Silicone Material
Tubes And Pipes For Injection Silicone Material is flowing liquid with general hardness of 22-50A° after curing with features:
1. resistance to deformation and high-temperature, acid-alkali and expansion
2. good tensile strength, tear strength and elongation
3. high reproduction times
Technical Datasheets of Tubes And Pipes For Injection Silicone Material
Iterm |
| Appearance | Viscosity (cP) | Density g/cm3 | Hardness(Shore A) | Elongation(%) | Tear Strength(kN/m | Curing condition | ||
HY-921 | Transparent | 400 | 1.07 | 30 | 400 | 25 | Pls mix part A and part B by mixing ratio 1:1. The mixture will get formed to be molds with size 150mm*150mm*2mm within 1mins under Temperature 150 centi degrees. | ||
HY-922 | Transparent | 600 | 1.08 | 40 | 550 | 35 | |||
HY-923 | Transparent | 700 | 1.10 | 50 | 450 | 35 | |||
HY-924 | Transparent | 600 | 1.12 | 60 | 380 | 35 |
If you have more interesting about the Tubes And Pipes For Injection Silicone Material,pls feel free to contact Ms Fiona
