Brand:G
Specifications
metal spiral wound gasket:
1.Graphite,PTFE,asbestos as filler
2.Materials:316,304,CS
3.Pressure:32Mpa
4.ISO9001 certified
Gasket Type:
Basic type SWG
SWG with inner ring
SWG with outer ring
SWG with inner and outer ring
Gasket is used on the heat exchanger with reinforcing rib, please note
Flange type and Spiral Wound Gasket form
Flat face flange(F.F) | Gasket with an outer ring |
Gasket with an inner and outer ring | |
Raised face flange(R.F) | Gasket with an outer ring |
Gasket with an inner and outer ring | |
Male and female flange(M & F) | Basic form gasket |
Gasket with an inner ring | |
Tongue and groove flange(T & F) | Basic form gasket |
Gasket with an inner ring | |
Flat and groove flange(F & G) | Basic form gasket |
Gasket with an inner ring |
Other Properties:
Filler material | Temperature(°C) | Max operating pressure(kg/cm2) |
Graphite | -200~550 | 250 |
Asbestos | -150~450 | 100 |
PTFE | -240~260 | 100 |
Product standard:
We can produce according to standards as ANSI B 16.20,MSS SP-44,API 605,DIN,JIS,JPI,BS 1560,JG/T,GB/T,HG,SH, etc. Or the demands can be designated in detail by clients. E.g. the gasket used for heat exchanger and with ribs, please provide the detailed drawings
