Model:SPB-20LJSGE
Send Inquiry
Specification:
| Blow Molding Machine Model | SPB-20L1JSGE | |
| base Specificatioins | ||
| Material | PE, PP, ABS…. | |
| Max container capacity | L | 20 |
| Output (dry cycle) | Pc/hr | 400 |
| Machine Dimension (L*W*H) | M | 4.1*2.3*3.6 |
| Total weight | T | 9 |
| Clamping Unit | ||
| Clamping Force | KN | 176 |
| Platen opening stroke | MM | 250-700 |
| Platen size | MM | 720-600 |
| Max mould size (W*H) | MM | 440*650 |
| Mould thickness | MM | 250-350 |
| Overall Dimension | M | 4.0*1.6*1.85 |
| Driving Unit | ||
| Max drive | KW | 52 |
| Total power consumption | KW | 65 |
| Fan power for screw | KW | 0.9 |
| Air pressure | Mpa | 0.8 |
| Air consumption | m3/min | 0.6 |
| Average power consumption | KW | 32 |
| Extruder Unit | ||
| Screw diameter | MM | 75 |
| Screw L/D ratio | L/D | 26 |
| Melting capacity | Kg/hr. | 120 |
| Number of heating zone | zone | 4 |
| Extruder heating power | KW | 20.2 |
| Extruder driving power | KW | 30 |
| Overall Dimension (L*W*H) | M | 3.8*1.75*1.2 |
| Accumulator Head | ||
| Number of heating zone | Zone | 4 |
| Power of die heating | KW | 15.2 |
| Max die-pin diameter | MM | 250 |
| Accumulator capacity | L | 5 |
| Overall dimension (L*W*H) | M | 1.9*0.65*0.52 |
Note: Technical parameters improvement without notice under normal circumstances.
