Flat emitter mold
ONE: THE PARAMETER OF THE FLAT DRIPPER MOLD :
Cavity quantity | Thirty-two cavities | Sixty-four cavities | Note |
Overall dimensions of the mold(mm) | 350*350*270 | 500*450*455 |
|
Gate forms | Submarine gate/cold(hot)runner inlet | Submarine gate/hot runner inlet | Balance material feeding, automatically interrupted pouring |
Pushing-out mode | Secondary pushing-out of ejector pin | Secondary pushing-out of ejector pin | Making sure that the final products will drop off automatically |
Cooling mode | Water-cycle cooling | Water-cycle cooling |
|
Working mode | Automatic production | Automatic production |
|
Service life | One point five million times | One point five million times |
|
Producing deviation | ≤5% | ≤5% | Deviation of emitter flowing rate |
Model of injection molding machine for it | ZF1600-A | ZF2400-A |
|
TWO: THE PRODUCT PRODUCED BY THE MOLD IS AS FOLLOWS:
THREE:THE MOLD PICTURE:
FOUR :THE DEscriptION OF THE MOLD :
The mold has high accuracy with the treatment of nitriding and tempering, making the proceed mold precision very high and reach the European standard. And the machine brand to make the mold is Switzerland ARGE CHARMILES.
