Description of the goods:
A) High Pure brass
B) Chrome coloured body Or Any other colours also can do it!
C)The technical and quality requirements of our faucet products are summarized as per the followings:
A. The thickness of electroplate
-Copper Plate: Seven-eight (Microm)
-Nickel plate: Fifteen um (micron)
-Chrome plate: One point three(micron)

B. Coating quality:
Corrosion resistance testing-Neutral Salt Spray Test (NSS test) is Two -hundred hours. Upon completion of the salt spray test, apparent surfaces shall not show any defect.

Coating adherence test-sectioning test:
After testing has been carried out at three different places, there shall be neither peeling nor separation for coating.

C. The ceramic cartridges (head-part) that we use are from:
- Spain: Sadel
- China: Ming Shi
- Austria: Kerox
- SCC: Korea
Or up to customer option (Upon our customers request, we could use other appointed ceramic cartridge).

The precise functioning with highest reliability up to Five-Hundred thousand load cycles for opening and closing.

D. The minimum flow pressure to activate the diverter function in our bath/shower mixer is O point Zero five Mpa (Zero Piont Five bar) which is comply to European and international Standard.

E. Our faucets specification:
- Test pressure One Point Six Mpa (Sixteen bar)
- Flow pressure Min. Five in a thousand Mpa (Zero Point Five bar)
Max.: One Mpa (Ten bar)
- Recommended pressure: Zero Point One Mpa to Zero point Five Mpa (One to 5Five bar)
- Temperature at hot water inlet: Max. Nineteen degree C

F. The lead composition of our brass is not exceeding One Point Six% which is comply to EN and other international standard.