This cutting saw with CNC worked automatically and with high precision and effciency. The PLC adopted from mitsubishi in Japan. Used for not only aluminium profile cutting, but also corner connector cutting.

Main features:
1: Feeding system adopts imported linear guide pair, with high accuracy and long service life.
2: Adopted CNC technique, can achieve various profile auto cutting off.
3: 22.5° , 45° And 90° Cutting is available.
4: imported carbide saw blade give accurate processing and high endurance.
5: imported linear bearing motion pair ensured steady processing accuracy.
6: Saw blade rotate smoothly due to high accuracy main spindle.

7: Uniform sped feeding and smooth motion due to air-hydraulic damping cylinder.
8: The two-way location-and-clamping feature high precision and steadiness.
Parameters and specification
Repeating fixed length precision less than 0.2mm
Cutting angle ± 5
Cutting plane less than 0.1mm
Cutting harshness ra12.5 µ M
Power supply 380V 50Hz (three phase, four wire)
Motor supply 2.2kw× 2.

Speed 2800rpm
Saw blade dimension φ 500× 4.4× φ 30× Z120
Air pressure 0.5-0.8 mpa
Air consumption 200l/min
Cutting angle 90° 45° 67.5° (22.5° )
Cutting length max 4200mm min400mm
Cutting width max140mm
Cutting height max 300mm
Overall dimension 5500mm× 1700mm× 1800mm
Weight 1800kg.