Rim SG LOCK (Threaded Insert Nuts for post heat insertion)

Knurling in alternate direction provides high tensile and torque strengths.

This most versatile insert nut has a guide on the insertion part,wich supports

the temporarily placed insert and ensures easy and vertical insertion.

Major insertion methods

Hert insertion   Ultrasonic insertion   High-frequency insertion

Material

Brass   Aluminum alloy(made to order)    Stainless steel(made to order)

Plastic

Thermoplastics

Features

1.The rim with SG Lock

2.Knurling in alternate directions provides high strength

3.Guide for assisting manual insertion
4.Most common post insertion nuts
5.Full compliance RoHS directive

Dimensions

                                        RiM SG Lock Dimensional Drawing

 Rim SG lock reinforcement data, for reference

Note

SG3.6-M2-2.2 has a single knurling.
Please contact us if you need Pb-free material for environmental reasons.
Pilot hole diameters are for reference only.
The diameter should be determined by testing before use.

Please contact us about the knurling design when SG Locks are used for
 polycarbonate (PC) and other materials which are sensitive to residual stress.
The diameter of the pilot hole for the mounting object should be smaller
 than the outer diameter of the insert (Dimension A).
When inserts are tightened by screws, choose the screw length so that screws
 do not reach the bottom of insert pilot holes.
The specifications are subject to change without notice.
Please contact us if you have any other questions.