LEED SN928X is an environmental conductive paste designed on silicon solar cell(n+) positive electrode. The conductive component in silver paste will be the excellent ohmic contact characteristics with silicon chip penetrating SiNx film, with good printing, low contact resistance, high resolving power and high fill factor.

Data Sheet
SN9081 SN9082
Solids Content 85~90%
Viscosity(PA@S)(Brookfield HBT, 25° C, 10rpm) 380± 20
Fineness <10μ M
Screen(BOPP stainless steel) 325/24mesh
Drying infrared stove, 250~300° C/3min
Firing 760~900° C/1~20seconds
Dried Thickness 22± 3μ M
Fired Thickness 15± 2μ M
Resistivity (fired thickness) ≤ 2
(220° C, 62Sn/36Pb/2AG)solderability >95%
(220° C, 62Sn/36Pb/2AG)weldability 10seconds
Photoelectricity Conversion Efficiency Single crystal silicon, average conversion efficiency≥ 178.2
Polysilicon, average conversion efficiency ≥ 16.8
Thinner LEED XS-09