C TYPE CLAMP
1)material : Malleable Iron Grade 32510
2)Surface:ZN/PLN
3) Square Bolt+ EG Nut

4)Mouth:3/4"  

5)Recommended for use under roof installations with bar joist type construction, or for attachment to the top or bottom flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange and where the thickness of joist or flange does not exceed 3⁄4". 

Features:
• They may be attached to horizontal flanges of structural members in either the top beam or bottom beam positions.
• Secured in place by a cup-pointed Set Screw tightened against the flange. A Jam Nut is provided for tightening the Set Screw against the Body Casting.
• Thru tapping of the body casting permits extended adjustment of the threaded rod.

ISO9001:2008 approved

Chemical Performance:

C:2.8%  Si:1.4%  Mn:0.6%  S:0.174%  P:0.060%

Physical Performance:

Hardness:130

Strength:325N/MM2

E.T.:10%

Package:100Pcs/Carton,cardbox  then in plywood pallets.

Payment:30% deposit,70% balance after cargos shipped.

Delivery date:45 days since firm order placed.

ORDERING

1.material & finish

2.Weight per Piece

3. Thread Size & Bolt Size

4.QTY you might order.

 (any special requirement, Pls send us the drawing,OEM is welcomed)