MCN(F)D Magnetic Drive Pump
Size: 25-50
Capacity: Max. 65m3/h
Head: Max.60m
Speed: 1450/2900r/min
Operating Temperature: Max. +100°C
Pressure rating: 1.6Mpa and 2.5Mpa
Viscosity: Max. 100mm2/S
Power bound: Max. 30Kw

Design
The construction and ratings scheme of the pumps conform to EN 22858 / ISO 2858 / ISO 5199 and have a permanent magnetic coupling as an integral component. The required output is transferred to the pump via a conventional standard three phase current motor of type B 3 or B 35 with the corresponding intermediate coupling.

Application sector
For the delivery of aggressive, toxic, explosive, precious, inflammable and slightly volatile fluids.

Magnetic drive
Thanks to the use of new types of permanent magnetic materials with high energy density, it is possible to house a powerful magnetic coupling within the pump bearing
support specified in the standard. The magnetic drive is equipped for direct activation when operated using standard three phase current motors and does not require any type of coupling. In addition, the permanent magnets are highly stable against demagnetising effects, such as those which may occur when assembling or disassembling the rotor or if the maximum transmittable torque is exceeded.