Brand:RNOMAC
Model:BM1
BM1 Series low speed high torque motors
Description and Features
M1 series motors are small volume spool valve orbit motor with the following features:
- Advanced design of spool valve and stator&rotor, small size and compact structure.
- Credible design of shaft seal, which can bear high pressure and be used in parallel or in series.
- Direction of shaft rotation and speed can be controlled easily and smoothly.
- High efficiency and economical, suitable for medium duty applications.
- A variety of connection types of flange, output shaft and oil port.
Specifications
Displacement cm³/r [in³/r] | 50 [3.1] | 63 [3.8] | 80 [4.9] | 100 [6.1] | 125 [7.6] | 160 [9.8] | 200 [12.2] | 250 [15.3] | 315 [19.2] | 400 [24.4] | |
Flow LPM [GPM] | Cont. | 38 [8] | 45 [10] | 58 [13] | 58 [13] | 58 [13] | 58 [13] | 58 [13] | 58 [13] | 58 [13] | 58 [13] |
Int. | 45 [11] | 53 [12] | 69 [15] | 69 [15] | 69 [15] | 69 [15] | 69 [15] | 69 [15] | 69 [15] | 69 [15] | |
Max. Speed (RPM) | Cont. | 698 | 663 | 685 | 560 | 456 | 356 | 285 | 236 | 179 | 145 |
Int. | 858 | 775 | 820 | 671 | 548 | 426 | 341 | 282 | 210 | 173 | |
Pressure ΔBar [ΔPSI] | Cont. | 125 [1813] | 125 [1813] | 125 [1813] | 125 [1813] | 125 [1813] | 125 [1813] | 110 [1595] | 100 [1450] | 90 [1305] | 90 [1305] |
Int. | 140 [2030] | 140 [2030] | 140 [2030] | 140 [2030] | 140 [2030] | 125 [1813] | 125 [1813] | 125 [1813] | 125 [1813] | 110 [1595] | |
Torque Nm [lbf-in]
| Cont. | 74 [655] | 87 [770] | 124 [1097] | 155 [1372] | 194 [1717] | 227 [2009] | 282 [2496] | 302 [2673] | 365 [3230] | 456 [4036] |
Int. | 86 [761] | 98 [867] | 141 [1248] | 176 [1558] | 221 [1956] | 260 [2301] | 318 [2814] | 383 [3390] | 406 [3593] | 521 [4611] | |
Note:
1. Intermittent means the entrance of the maximum pressure; continuous working pressure means the differential pressure.
2. Motor should not work under the highest pressure and the maximum speed.
3. The running time should not exceed 10% under intermittent working conditions.
4. The Maximum working temperature is 80 °C.
5. The maximum allowable back pressure is 10MPa, but the recommended back pressure should not exceed 5MPa.a leaking pipes is needed when exceeding.
6. one hour running time under 40% of maximum working pressure is recommended before full capacity working.
7. Recommending N68 anti-wear hydraulic oil, viscosity 37-73cSt, cleanliness ISO18/13.
