Brand:TMWT
Model:Q641F/H/Y
pneumatic ballvalve
material:stainless steel,carbon steel
connection:thread clamp welding
medium:water nitric acid, acetic acid class
Material | Contact product parts | 316L.(1.4404) |
non-contact product parts | 304(1.4301) | |
Provide E N 10204 3 .1B certificate | ||
Seal material | standard | EPDM / PTFE All seal material meet FDA 177.2600 |
option | HNBR/PTFE, FPM/PTFE, Silicone/PTFE All seal material meet FDA 177.2600 | |
Temperature | Running working temperature | -20~+135°C (EPDM/PTFE) |
Sterilization temperature | 150°C (max 20min) | |
Pressure | Working pressure | 0~16bar (standard) |
Accepting high pressure requirement | ||
Control air pressure | 5~8bar | |
Surface treatment | Internal surface | Ra≤0.8μm |
External surface | Grit blasting | |
Connection | Connection standard | welded end: DIN 11866 series2 |
welded end: INCH pipe standard | ||
Connection method; welding, thread, clamp, flange | ||
Option |
Intelligent controller | 24V DC |
1/2 electromagnetism valve | ||
Position sensor | 24V DC | |
1/2 NPN/PNP position sensor | ||
