electric water pump(QB)
INSTALLATION AND APPLICATION
These pums are suitable for handling clean water not containing abrasive particles which are not chemically aggressive to the pump components. Reliable, economical and simple to use, they are suitable for domestic applications and the automatic distribution of water from surge tanks, watering farms and gardens and for boosting insufficient mains water pressure.These pumps should be installed in a covered area, protected against in the weather.
OPERATION LIMITS
Suction lift up to 8m
Fluid temperature up to 60 °C
Maximum ambient temperature 40°C
Pump Model | Power | Inlet and outlet(inch) | Impeller material | Max.Head (m) | Max.Flow (L/MIN) | ||
Single Phase | Single Phase | Kw | HP | ||||
| QB60 | 0.37 | 0.5 | 1x1 | Brass | 35 | 36 |
| QB70 | 0.55 | 0.75 | 1x1 | Brass | 45 | 45 |
| QB80 | 0.75 | 1 | 1x1 | Brass | 60 | 50 |
STRUCTURAL CHARACTERISTICS
cast iron pump body
stainless steel mechanical seal(graphite to ceramic)
brass impeller with radial peripheral blades
protection IP44
Hi-Cr plated 45# steel shaft
with thermal overload protector in single phase motor
Brand bearing or local bearing
