Model | MCL-80A | MATERIAL | Balance, cast steel, stainless |
MAX.PRESSURED HEIGHT | 24m | PLACE OF UUSE | Outdoor, indoor, underwater |
INTAKE HEIGHT | 6m | CABLE | 7m(standard) |
PUMPING CAPACITY | 50m3/h | CABLE | 10m(ordering production) |
RPM | 2900 | Hose Power | 2.2kw .3pole |
1,Integrates the functions of submersible pump, ordinary self-priming pump on land and anti-corrosion pump in one, overcomes the technical problems of one pump can not be used in water and on the land. This pump can be used as a submersible pump in water, also can be used as a ordinary self-priming pump to avoid the rainwater on the land
2,shell and some parts made up of synthetic resin,stainless steel and other corrosion-resistant material,that can be widely used in industry, chemical industry, agriculture, pesticides, fire, construction, water treatment, marine, and so a variety of fields,and can be placed anywhere;
3,an independent water-cooling circulation system, even if running for a long time, will also balance a low temperature.If used in the water environment improperly, the equipment will idle, when the temperature reached a certain degree, the automatic power-off protection starts to protect the motor;
4,super-hard alloy seal, has longer lifetime;
5,special structure design, its flow is much larger than similar pumps;
(Example: 50mm diameter, motor 1.5kw, Suction 6m, head 20m, a displacement of 550 ~ 600L / min)
6,water cooling and sealing anti-noise design, almost no noise, quiet environment.
1,Integrates the functions of submersible pump, ordinary self-priming pump on land and anti-corrosion pump in one, overcomes the technical problems of one pump can not be used in water and on the land. This pump can be used as a submersible pump in water, also can be used as a ordinary self-priming pump to avoid the rainwater on the land
2,shell and some parts made up of synthetic resin,stainless steel and other corrosion-resistant material,that can be widely used in industry, chemical industry, agriculture, pesticides, fire, construction, water treatment, marine, and so a variety of fields,and can be placed anywhere;
3,an independent water-cooling circulation system, even if running for a long time, will also balance a low temperature.If used in the water environment improperly, the equipment will idle, when the temperature reached a certain degree, the automatic power-off protection starts to protect the motor;
4,super-hard alloy seal, has longer lifetime;
5,special structure design, its flow is much larger than similar pumps;
(Example: 50mm diameter, motor 1.5kw, Suction 6m, head 20m, a displacement of 550 ~ 600L / min)
6,water cooling and sealing anti-noise design, almost no noise, quiet environment.
