Diaphragm Pump
Pneumatic electric Diaphragm Pump:
Electric Diaphragm Pump
Technical Parameter
1.Caliber: DN10-DN100mm
2.Flow capacity: 0.8-30 m3/hr
3.Head: 50m
4.Self-priming distance: ≤7m
5.Pressure: 0.3-0.6Mpa
6.Work temperature: ≤150°C
7.Viscosity: ≤10000mm2/s
8.Discharge ability: ≤10mm
9.Max air pressure: 2-7 kgf/cm2
10.Pump body material: Stainless steel, Cast Iron,Cast Iron Rubber lined and so on.
Description
Electric diaphragm pump is a new type of pump, in recent years, since the membrane material made a breakthrough, there is increasing number of industrialized countries have adopted this type of pump, replace the part of the centrifugal pump, screw pump , to apply to petrochemical, ceramics, metallurgy and other industries, product design, all reference to the U.S. ABEL's prototype, the pump for low pressure, ie outlet pressure ≤ 3kgf/cm2 occasions.
Application ranges
| 1.Variety of toxic, flammable, volatile liquid. |
| 2. Variety of strong acid, alkali, strong corrosive liquids. |
| 3. Can deliver a higher temperature medium 150 °C. |
| 4. As a filter press before the class to send a variety of pressure devices. |
| 5. Hot water recovery and recycling. |
| 6. Oil tanker, oil depots, oil loading and unloading. |
| 7. Pumping pickles jam, mashed potatoes, chocolate and so on. |
| 8. Pump-priming paint, rubber, pigment binder. |
| 9. Various porcelain glaze slurry of cement grouting mortar mud. |
| 10.Various latex latex, organic solvents, fillers. |
| 11. With pump for the tanker barge warehouse clearance absorb the oil within the sewage and left. |
| 12. Hops and yeast slurries, syrups, sugar density. |
| 13. Pump-priming mines, trenches, tunnels, sewage in the sewage sludge. |
| 14. To send a variety of special media suck. |
Pneumatic diaphragm pump:
Description
QBY series pneumatic diaphragm pump produced by our company is a new type conveying equipment. It uses compressed air as the power source and can completely suck various type of corrosive, solids-laden, high-viscosity, inflammable, volatile and highly toxic liquids. Its performance parameters approach to WLLDEN-PUMPS, Germany and MARIOWPUMPS, USA.
Main application
1.pneumatic diaphragm can suck peanut butter, pickled vegetable, potato mud, small sausage, apple jam and chocolate.
2.pneumatic diaphragm can suck paint, gum and pigment
3. pneumatic diaphragm can suck all kinds of adhesive and glue.
4.Various kinds of glaze slurry for tile, porcelain, brick and pottery.
5.It can suck the sediment and grout when the oil well drilling is completed.
6.It can suck various emulsions and fillers.
7.It can suck sewage water.
8.It can be used to suck the sewage in the cabin of oil tank-cleaning barge.
9.Thin slurry of hop and yeast, syrup and gooey.
10.It can be used to suck accumulated water in mining well, adit, tunnel and accumulated water from ore dressing and in slags. It can pump the cement grout and mortar.
11.Various gum slurry
12.Various abrasives, corrosive agents, petroleum, mud slurry, washing oil stain and conventional vessels.
13.Various highly toxic, inflammable and volatile liquids
14.Various strong acid, strong base and strong corrosive liquids
15.Various high-temperature liquid up to 150°C
16. pneumatic diaphragm can be used as the forestage pressure transmission device of various filter presses.
| model | flow (m3/h) | head (m) | self priming ability m | suction (m) | The max particles passed (mm) | speed rpm | power (kw) | N.W (kg) | caliber (inch) |
| DBY-10 | 0.5 | 30 | 3 | 1 | 0.55 | 50 | 3/8"thread | ||
| DBY-15 | 0.75 | 3 | 1 | 0.55 | 50 | 1/2"thread | |||
| DBY-25 | 3.5 | 4 | 2.5 | 1.5 | 170 | 1"thread | |||
| DBY-40 | 4.5 | 7 | 4 | 4.5 | 1450 | 2.2 | 180 | 1.5"thread | |
| DBY-50 | 6.5 | 4.5 | 8 | 4 | 400 | 2"flange | |||
| DBY-65 | 8 | 4.5 | 8 | 4 | 400 | 2.5"flange | |||
| DBY-80 | 16 | 5 | 10 | 5.5 | 610 | 3"flange | |||
| DBY-100 | 20 | 5 | 10 | 5.5 | 610 | 4"flange |
