Chemical material dispenser:
A, Scope of application and adaptation
1, Apply to organic compounds like: Benzenes: Toluene, Xylene, Alcohols: Methanol, ethyl hydrate, hydrocarbons; Polymerizations, phenolics, flavanoids, es, alkanes, lipids and other derivative compounds, also apply to other chemical materials and inorganics like: Acid, base, salt and their composition.
B, Description: Chemical liquid filling machine
C, JTSH model: JTSH
D, Technical parameters

1, Flow rate range: 10_100 liter per minute
2, Accurancy: ± 0.3%
3, Single count: 0_9999.99 liter
4, Accumulative count: 0_999999.99 liter
5, Power supply: AC380V± 15%
6, Power: Vary in 1.5-4KW
7, Working environmental temperature: -40° C--+100° C(electronic application of temperature)
8, Noise: ≤ 70dB(A)

E, Function
1, There are two modes for filling as presetting and non-presetting. Memory function is avlible for successive presetting, no need to reset data after the first time of successive presetting filling.
2, Accumulative filling data can be queried
3, Measure: Volume

F, Configuration
1, Machine needs to be fixed
2, Steel tube with length of 5 meters. Nozzle is controlled by ball valve, both nozzle and ball valve is stainless steel.
3, Input: Joint type of input: Flange joint)
4, Pipeline material: From input to output, the whole pipeline for liquid medium is 304 stainless steel with the content of nickel exceed 8
5, Inner pipeline is corrosion resistant
6, With LED display

G, Proper pipeline condition when pumping
1, For above-ground tank, outlet should be in the bottom of the tank, inner diameter of pipeline should be 40, distance between tank and filling machine should be no more than 20 meters, otherwise, flow rate will be lowered down.
2, For under-ground tank, inner diameter of pipeline should be 40. Distance between tank and filling machine should be no more than 10 meters, otherwise, flow rate will be lowered down. If above distance is beyond 10 meters, take the combination of motor and pump out from filling machine. Put the combination within 2 meters from tank, then liquid mediums can be drown out even it is 100 meters from filling machine to tank. In this situation, the combination of motor and pump will be taken out by manufacturer.

H, Option
Filling management system: The system provide real-time supervision, monitoring working state of every machine. It also can output daily report and monthly report.

I, After confirming the model you want, the following information should be provided by customers:
1. The diameter of receptacle on the receiver.
2. Length of hose pipe.
3. Probable filling vol.
4. Name of liquid mediums and their viscosity values
5. Schematic diagram
6. Demands in materials