FORK LIFT POWER UNITS 2
This power unit is designed exclusively for the fork lift, consisting of high pressure gear pump, a DC motor, multifunctional manifold, valves tank, ect. The up and down movement are controlledby the level of the mannal release valve, which is equipped with an electric swich for the motor start. The lowingspeed is automatically adjusted by the pressure compensated flow control valve.

Remark:
Please go to page 1 or consult our sales engineer for the different pump displacement, motor power or tank capacity.

Special Notes
1. The duty of this power unit is S3, I. E., 30 seconds on and 270 seconds off.
2. Clean all the hydraulic parts concemed before mounting the power unit.
3. The viscosity of the oil shoud be 15-68 cst.
4. Change the oil after the first 100 hours of using the power unit, then change the oil every 3000 hours
5. The power unit should be mounted horizontally.