DEscriptION
The optical fiber patch cords are fitted at both ends with same connector types or different connector types. Our fiber optic patch cords are ultra reliable devices featuring low insertion loss and high return loss. The patch cords come with your choice of simplex or duplex cable configurations and various cords of style.
The fiber optic connector consists of two plugs and an adapter. The optical connection is made in a sleeve using two high precision machined ferrules. These comprise a cylindrical metal coupling nut with keyed sleeves. Precision sleeve is built into square or round flange housing.

FEATURE OF PATCH CORDS
FC/SC/LC /ST/MTRJ/MU/E2000/MPO/D4/DIN/SMA/FDDI/ESCON connector optional
Comply with IEC, ITU-T, ETSI recommendations and Telcordia standards.
Low insertion loss and high return loss
Good repeatability
All models of cables optional, all kinds of combinations
Superior qualified standard PC/UPC/APC polishing
0.9mm. 2.0mm. 3.0mm and all diameter cable are available
Single mode (9/125) or multi modes (50/125 or 62.5/125)
Simplex/duplex patch cord available
100% optic test (insertion loss and return loss)
APPLICATION OF PATCH CORDS
High Speed Digital System Cards
DWDM Application
Optical communication systems
Optical instrument

STRENGTH MEMBER
The strength member of the patch cord is made of Aramid Yarn (Kevlar optional).

SHEATH
Material: Flame retardant PVC
The sheath is reasonably circular, free from pin hole, joints, repaired places and other defects.
Beneath the sheath is a layer of Aramid Yarn(Kevlar optional)
Diameter: 0.9mm. 2.0mm. 3.0mm and all diameter cable are available

OPTICAL PERFORMANCE OF PATCH CORDS
Optical Fiber
Type: Single Mode and Multi Mode
Wave Length: 1300nm, 1490nm, 1550nm
Max. 0.4dB/km at 1300nm
Max. 0.35dB/km at 1490nm
Max. 0.25dB/km at 1500nm
Fibre conform to ITU+T Recommendation G652D and ITU-TG651.

ConNECTOR PLUG
Type: FC/PC or FC/APC or FC/UPC, SC/PC, SC/SPC, SC/UPC, SC/APC, LC/PC, LC/SPC, LC/UPC, LC/APC, E2000/PC, E2000/UPC, E2000/APC, MTRJ/PC, MTRJ/UPC, ect
Length: Approx. 42mm
Insertion Loss: <0.5dB
Return Loss: >22dB
Repeat connection: Insertion loss increases by less than 0.2dB during a test cycle of 500 repeat connections/disconnections.

MECHANICAL PERFORMANCE OF PATCH CORDS
Minimum Bending Radius: 30mm
Tensile Strength: 10kgf
Colour: Yellow
Length: 0.5m, 1.0m, 1.5m, 2.0m, 3.0m, 5m, 10m, 15m, 20m, 25m, 30m, etc. ( Remarks: Any length is available according to customer's requirement)