Model:AM
The AM/AF series of electric damper actuators are used in ventilation, and air-conditioning (HVAC) applications. The AM series of electric damper actuators are modulating control actuators used with controls that provide an analog output of 0 to 10Vdc, 2 to 10Vdc or 4-20mA. The internal selector plug can be used to reverse the direction of action. The AF series of electric valve actuators are controlled by an on/off output.
Low power consumption
Position feedback by signal
Direct/reverse acting
4-20mA/0-10V/2-10V choice
Maintenance free
Quick and easy installation
No separate linkage required
Accurate valve positioning
Indicator Continuous Position Indicator
Manual Override Non-clutch design
Stall Protection Built-in thermal protection
WARNING
1.only for professional installation. To avoid injury and electric shock, do not perform any servicing other than that contained in this manual.
2. All actuators have been installed before shipped from the factory; no electrical adjustments are required before placing them in operation.
3.Check the connections before energizing the power supply because wrong connections can damage the equipment.
4.The actuator should be stored in a clean and dry shipping carton.
TECHNICAL DATA
Actuator | |
Actuator | AF/AM |
Output torque | 10, 15, 20,30 40N.m |
Power supply | AC220V or AC/DC24V |
Run time | about 120S |
Operating power | 5VA |
Output angle | 90°± 3° |
ON/OFF control signal | 1 wire or 2 wire control |
Control signal | 4(0)~20mA,or 0(2)~10V |
Feedback signal | DC0 -10V |
Installation position | Upright to horizontalNo upset |
Protection class | IP54 |
Ambient conditions | - 10°C. to. +55°C 0..90% RH |
Weight | 1kg |
Material | Flame-resistant Abs |
DIRECTION OF ACTION
Repositioning the selector plug S3 can change the direction of action.
S3 ON 10V/20 mA OFF 0V
