Carbon Rod, carbon electrode, air-arc gouging carbon electrodes
Class: half round copper-coated carbon electrodes, round copper-coated carbon electrode, DC copper coated hollow carbon electrodes, rectangular copper-coated carbon electrodes, DC copper coated blasting carbon electrodes, Jointed copper-carbon electrode, AC copper coated pointed carbon electrodes.
Product Techniques: this product is based on graphite , felt by asphalted and modeled with thermal extruding mechanice and thermal plates.
Proudct Usage: The series of products have a widely use on shipbuilding, boiler pressure vessel makeing, casting, steel, storage cell in light mechanic and chemical making.
Proudct Capability: thie product is used for incise, dig, driller, welding, it is available for mild steel , cast steel , stainless steel, pure steel and other metals.
Product Advantages: This product is easy to operate, having widely application scales,good effects and economical.
| model | Dia*length | Current Ranger(A) | |
| mm | inches | ||
| Tr503.2 | 3.2*305 | 1/8*12’ | 130-180 |
| TR504 | 4*305(355) | 5/32*12’(14’) | 150-200 |
| TR506 | 5*305(366) | 3/16*12’(14’) | 200-250 |
| TR506 | 6*305(355) | 15/64*12’(14’) | 300-350 |
| TR506.6 | 6.5*305(355) | 1/4*12’(14’) | 320-370 |
| TR507 | 7*355 | 9/32*14’ | 350-400 |
| TR508 | 8*305(355)(510) | 5/16*12’(14’)(20’) | 400-450 |
| TR509 | 9*305(355) | 23/64*12’(14’) | 450-500 |
| TR510 | 10*305(355)(510) | 3/8*12’(14’)(20’) | 500-550 |
| TR511 | 11*305(355)(510) | 7/16*12’(14’)(20’) | 600-650 |
| TR512 | 12*305(355) | 15/32*12’(14’) | 750-850 |
| TR513 | 13*305(355)(430)(510) | 1/2*12’(14’)(17’)(20’) | 800-1000 |
| TR516 | 16*355(430)(510) | 5/8*14’(17’)(20’) | 1000-1200 |
| TR519 | 196*355(430)(510) | 3/4*14’(17’)(20’) | 1200-1400 |
Instructions:
1. Thel electrodes must keep in dry environment, if it is affected with damp must be drying before use.
2. When using for the direct current, the electrodes link to the anode, and task to the cathode.
3. Keeping steady of working air pressure0.5-0.6Mpa.
4. The arc between electrodes and task is 3mm, the electrodes come out clamp about 100mm.
5. The electrodes and tast must have a angle and dig throw the tangent.
6. Keep aeration during use, operate accord with the work limit.
