L298N Dual H Bridge DC Motor Driver

For Stepper Motor/Robot /Smart Car

Accept Paypal

UC147

Feature of Stepper Driver:

1. Driver: L298N Dual H Bridge DC Motor Driver IC

2. the terminal supply area of driven part Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: 7V ~ 35V

3.the peak current of driven part Io: 2A

4. the terminal supply of area the logical part Vss: +5 V ~ +7 V (can take power within the board +5 V)

5. the operating current range of the logical part : 0 ~ 36mA

6. control signal input voltage range:

    Low:-0.3V ≤ Vin ≤ 1.5V

    High: 2.3V ≤ Vin ≤ Vss

7. enable signal input voltage range:

    Low: -0.3 ≤ Vin ≤ 1.5V (control signal is invalid)

    High: 2.3V ≤ Vin ≤ Vss (control signal active)

8. Maximum power consumption: 20W (when the temperature T = 75 °C)

9. Storage temperature: -25 °C ~ +130 °C

10. Driver Board Size: 55mm * 49mm * 33mm (with fixed copper pillar and the heat sink height)

11. Driver Board Weight: 33g

12. Other Extensions: control of direction indicators, the logic part of the plate to take power interface.

Package Included:

1 x L298N Dual H Bridge DC Motor Driver