This is a compact PMDC (Permanent Magnet Direct Current) electric motor with a variable speed
controller that takes a regular 115VAC input from a regular appliance outlet.  Due to properties of
permanent magnet stator, this motor is able to generate great torque at low speed.  

Controller:  On/Off switch, variable speed knob, reverse/forward switch, 115vac power cord in length of 54 inches(1372mm)

Motor:  No load at 5837RPM; 75W at 0.17N-m(1.6 in-lb) at 4000RPM; 101W at 0.377N-m(3.4 in-lb) at 2566RPM.  Basically, the lower the speed, the higher torque it's going to output.  A torque curve can be plotted by simply using the 3 data points provided.  Shaft is 10mm in diameter with flat and 32mm in length.  Square flange is measured to be 80mm by 80mm.  Diameter of mounting hole pattern is 93.5mm wide.  Each mounting hole is measured to be 5.5mm in diameter.  Distance from the front face of square flange to the back of motor is 111mm.  Cylindrical portion of the motor has a diameter of 78mm and an axial length of 104mm.

Connection between motor and controller is 20 inch(508mm) long.

We can supply you a 230v ac input unit based on your request.  Also, we can supply you a motor with different torque performance.