Metallurgy, Mineral & Energy
injection water distiller
2016-11-01 15:11  Views:158
Price:Negotiable
Model:LD
Send Inquiry

Introduction:

LD multiple effect distiller is designed and produced according to standard of <<YY0229 multiple effect distiller water machine>>, all parts are made of 304 or 316L SS, The produced distilled water is in high purity and pyrogen-free. Distilled water produced by Multi-effect distillation unit comply with requirements of U.S. , EU and China pharmacopoeia for WFI . It is a perfect device for pharmacy manufacture to produce diversified blood goods, injection, infusion, biologic antibiotic and so on.

 

Working principle:

Feed water is heating by plant steam in I effect pre-heater , then enters into posterior each effect pre-heater , pre-heated by plant steam condensate ,steam and distilled water are heating for them in the condensers ;In the top of evaporator , after water separator , enters evaporation tube uniformly distributed , becomes film type stream in the evaporation tube ; Because very thin, so after evaporation , can become rebirth steam very quickly , the feed water which are un-evaporated transport to the next effect , as the feed water , this process repeats on and on until the feed water in last effect are un-evaporated , drain as condensate ; The rebirth steam (evaporated feed water ), ascends in the evaporator spirally , enters pure steam pipeline as next effect pyrogen gets through middle and top special separator ; In the evaporator , pyrogen of rebirth steam absorbed by feed water condenses distilled water ; the processes for each effect are same , distilled water of each effect and rebirth steam of last effect are collected by condenser , heating change with cooling water and feed water , after cooling , become distilled water ; On-line detection for conductivity , qualified distilled water as WFI output , unqualified drain .

After three times separation , feed water turns into rebirth steam which are clean .The first time evaporation , feed water enters evaporator , then flow , at the same time evaporates ,The evaporated feed water in the lower extreme of evaporator back turns , in the action of gravity , foreign matters separate in the under-part , this is the second separation time ; For the third time , the rebirth steam (evaporated feed water ) ascends in the evaporator spirally , separates in the middle and top special separator .

The cooling water only gets through condenser, can drop temperature for distilled water produced by each effect and rebirth steam .Plant steam is heating for feed water in I effect evaporator and pre-heater, becomes condensate after absorbing pyrogen, then drain out of machine. Partly of air in feeding water cannot condensed, called incondensable air , according to the machine type , they can exhaust by device in the top of evaporator.

 

Technical parameters:

Model

Output (L/h)

Steam consumption (Kg/h)

Purified water consumption (Kg/h)

Cooling water consumption (Kg/h)

Dimension

(mm)

Weight

(Kg)

LD100-3

100

50

180

170

1000*800*2000

240

LD200-3

200

75

240

240

1000*800*2000

240

LD300-4

300

90

360

230

1100*800*2200

450

LD500-5

500

130

600

160

1600*900*2500

920

LD750-5

750

190

840

195

1700*1000*2900

1100

LD1000-5

1000

260

1100

270

2100*1100*3100

1800

LD1500-5

1500

400

1670

420

2500*1300*3400

2100

LD2000-5

2000

525

2200

550

3000*1300*3400

2200

LD3000-5

3000

800

3300

880

3500*1500*3800

3300

 

Equipment picture:

Contact Infomation
Send Inquiry
Company name:Pharmtech Machinery Co., Limited
Status:[Offline] [Send message] [Chat]
Business contact:keves xing(Ms.)
Telphone:
Mobile:
Fax:
Area: Caribbean Region-Bermuda
Address:No.555 CaoFeng Rd.,South to No.17 Bridge of Caoan Rd.,SHANGHAI