Model:SD-1M
Send Inquiry
SD-1M
Small Hole Drilling EDM
Features
- High drilling performance through any conductive material in cluding tungsten carbide, hardened steel, iron, copper and brass.
- The SD-1M opens mall holes using hollow copper electrode diameter from ø0.1mm to 4.0mm a high speed. (Maximum machining rate of 100mm/min.)
- With extremely low electrode wear(5~20%) in low wear machining, SD-1M delivers overwhelming cost effectiveness when com pared to similar machines.
- 0.00004" (0.001mm) DRO resolution(Option).
- Versatile, swiveling and swing head can easily open angled holes on flat, spherical and curved surfaces. It also works on work piece that is too large to be clamped on the worktable.
- The SD-1M provides an EDM machining operation with EDM oil, graphite solution and tap water etc. as dielectric fluids.
- Inch/metric conversion.
- M-function
- NEW- Electrode retraction value set function. Electrode change positioning function.
- Auto drill depth value compensation.
SD-1M
The new super drill, compact and simple to use, offers outstanding cost effectiveness. based on our extensive experience in clectrical discharge machines, the SD-1M is specially designed for fast, accurate small and deep hole drilling in virtually all sizes of hard materials.
Specification
| MACHINE | |
| Max. workpiece size(W x D x H) | 665mm x 435mm x 250mm (26" x 17" x 9.8") |
| X, Y table stroke | 360mm x 260mm (14"x 10") |
| Z axis stroke | 250mm(9.8") [option:350mm(13.8")] |
| Electrode guide travel distance | 270mm(10.6") [option:370mm(14.6")] |
| Z axis rotation angle | 180degree |
| Z axis cross travel distance | 200mm(7.87") [option:300mm(11.8")] |
| Z axis slant | ±90degree |
| Usable electrode diameter | 0.10mm ~ 4.00mm |
| Usable electrode length | 200 ~ 350mm (option : 400~450mm) |
| Z axis increment | 0.01mm |
| Outside dimension(W x D x H) | 805mm x 770mm x 1982mm (31.7" x 30.3" x 78") |
| POWER SUPPLY UNIT | |
| Max, power input | 4KVA |
| Input voltage | AC 3phase 200 ~ 220V, 50 ~ 60Hz |
| Max, Machining current | 40A |
| DIELECTRIC FLUID SUPPLY UNIT | |
| Dielectric fluid | Distilled water or PARA-1B |
| Fluid capacity | 60 Liters |
| STANDARD ACCESSORIES | |
| Electrode guide | 0.50mm / 1.00mm each 1pc |
| Pipe electrode (Copper) | 0.50mm / 1.00mm x 300mm x 20pcs |
| Tool box | 1 set |
| Instruction manual | 1 vol |
| OPTIonAL ACCESSORIES | |
| Electrode guide | 0.10 ~ 4.00mm (in 0.10mm step) |
| Electrodepipe | 0.10 ~ 4.00mm (in 0.10mm step) |
| Special dielectric fluid | SPW, Drllvit, Certrex 1015 |
| OPTIonAL TOOLING | |
| X, Y table readout (1/1000mm) | 350mm x 250mm (13.8" x 9.8") |
| Angle Display unit (Mutoh) | 5 / 100degree |
