Autoclaved Aerated Concrete aac blocks manufacturer
Autoclave in the AAC production line:
[introduction]
Autoclave is the key equipment in the production of aerated concrete and autoclaved brick. Our autoclave is a principle and cylindrical device made of steel, and has the advantages of good quality and reliable performance.
[Purpose of Autoclave]
The autoclave is applicable for curing the cut body under high temperature and high pressure, and is also applicable for curing the autoclaved brick under high temperature and high pressure.
[Structural Features ]
Our autoclave is a principle and cylindrical device made of steel, the cover is made of a whole piece of pressed 16 Mn steel board, and the flanges of cover and body adopt a whole piece of forged and processed 16 Mn steel board. The welding lines of pressed components are subjected to heat treatment and strict nondestructive test. The max design pressure reaches 1.65 Mpa.
[Main technical parameters ]
NO. | Specification (m) | Max design pressure (Mpa) | Working Pressure (Mpa) | Design temperature (°C) | Working temperature (°C)
| Working medium | Overall dimension (m) |
1 | Φ2×21 | 1.4 | 1.3 | 198.34 | 194.13 | Saturated steam | 22.12×26×2.973 |
2 | Φ2.5×31.5 | 1.6 | 1.5 | 203 | 200 | Saturated steam | 33.2×3.2×4 |
3 | Φ2.68×39 | 1.6 | 1.5 | 203 | 200 | Saturated steam | 40.65×3.46×4.25 |
4 | Φ2.85×26 | 1.65 | 1.5 | 205 | 205 | Saturated steam | 27.4×3.595×4.504 |
5 | Φ2.85×39 | 1.65 | 1.5 | 205 | 205 | Saturated steam | 40.4×3.595×4.504 |
The process of AAC brick making
We will offer the training, installation, plant design etc. This is a picture of the process of making aac brick, which can make you have a clear clue about it easily.
