Introduction
Model CH25-205-820 forming machine consists of uncoiler and its base, coil sheet guiding equipment, film covered device, roll forming system, post-cutting equipment, hydraulic station, controlling system, supporter table.
Technical Parameters
Material Spec | Colored steel sheet / galvanized steel sheet |
Thickness of Coil Sheet | 0.3 --0.7 mm |
Main Motor Power | 7.5kw |
Forming Speed | 10--12m/min |
Hydraulic Station Power | 3kw |
Quantity of Stands | about 18 groups |
Hydraulic Pressure | 10~12Mpa |
Controlling System | : PLC control system |
Index Error of Length | 10m±2mm |
Total Weight | about 1000kg |
Voltage | 380V 3 phase 60Hz or to the buyers requirement |
Material of Main Equipment
Roller Material | high grade No.45 forged steel, plated hard chrome on the surface of roller with thickness 0.05mm |
Active Shaft Material | high grade No.45 carbon wrought steel at Φ 75mm. |
Cutter Blade | Cr12 mould steel with quenched treatment. |
Electric Elements | Control system with PLC model S7-200, Siemins.transducer with ABB control panel with TP170, Siemens. It can input 10sets of spec at one time |
Oil Tank Model | CB-E310 |
