stainless steel FOB DETECTOR :
Size:70*L180mm
Weight: 0.8kg
Material: SS304 316 316L

reduce the loss of 10% beer during exchanging barrels

FOB Operation

Operation steps are as following:

.1.    When tap can not pour beer, this means the keg is empty;

.2.    Disconnect the empty keg and connect a full keg;

.3.    Bleed the FOB pressure through the valve handle on the top of FOB;

.4.    Make sure the FOB is full of beer and close the vent valve;

.5.    Rotate the lift handle , and check the float lifts to the top of FOB and rotate the lift handle clockwise;

.6.    Pour beer through tap, when can not pour beer , repeat steps 1 to 6.