With the knowing of many kinds of materials, people have a great demand of the polyurethane molding equipment of which the amount of material can be regulated according to the material requirements.
The polyurethane molding equipment, JHPK-III B235 is developed and produced by Beijing Jinghua Park Polyurethane Equipment Co.,Ltd. It has a molding system making the various proportions. The ratio between material A and B is from 1:1~1:2.
It has a cylinder of which diameter is 125mm for drive and two link rods to drive two material pumps having a stroke campaign. Each of the link rods has scale positioning holes, to lengthen or shorten the travel of the material pumps.
With adjusting the fixing positions of material A&B pumps, it can be chosen any proportion within the ratio it allows.
Standard Configuration
Mainframe: 1 set
Spray gun: 1 set
Heating and preserved pipe: 15m
Connecting pipe for spray gun: 1.5m
Transfer pump: 2 sets
Technical Parameter:
Electrical source:
Air source:0.5~0.8Mpa(70~120psi) ≥ 0.9m3/min
Output: 2~6.8kg/min
Heating device power for material: 2500w ×2
Heating power for pipe heating: 2000w
Single component output pressure: 5~10Mpa (700~1500psi)
The range of the ratio: 1:1~2:1
Shipping Parameter:
Volume: 800x700x1100(mm)
