PVC Welding Machine|| PVC Stretching Ceiling Film Welding Machine (RG-4000TA)
High frequency PVC welding machine(RG-4000TA)
High frequency plastic welder
High-sensitivity spark-proof device
High efficiency PVC blistering,sealing machine
Strong electric power output
Welding Machine for PVC
RG-4000TA Plastic welding machine
High-sensitivity spark-proof device
Tarpaulin,tent,canvas,PVC film
1. Application
Kinds of plastic products with main components of PVC including inflatable toys, handbags, footwear, trademarks, raincoats, stationeries, data plate and special double sided blister packaging, etc.
Technique specifications
ATTRIBTES // MODEL | RG-5000TA |
Output Power | 5000W |
Input Power | 8KVA |
Power Voltage | 380V 50-60Hz |
Oscillation frequency | 27.12MHz /40.68MHz |
Rectifier | Sillcon Diode |
Oscillation tube | 7T85RB |
Way of pressure | Pneumatic |
Gap of electrodes | 220mm |
Machine movement distance | 60mm |
size of dise | 350×700 |
size of machine | 1720×1100×1500 |
Net weight | 345kg |
Gross weight | 400 kg |
2.Basic operating principles
This machine is a high frequency device, whose self-exited oscillator of the electron tube can produce high frequency electromagnetic field. And the plastic to be processed is in the high frequency electromagnetic field between the upper and low electrode. When its interior molecules are polarized and produce heat automatically by mutual movement and friction, it will be welded with the pressure of the die.
3.Machine maintenance
a.Add oil lubricant in each function parts every several days, and often wipe cleanly.
b.To cleanout and lubricate each parts of the machine every half year, clear away the dust in the parts of transformer, high voltage capacitor, blower fan and Resonant Cavity.
c.If the aluminium pan of the output adjusting capacitor and the capacitor in the side of resonant cavity, was ablated by caustic caused by dust or eyewinker, the caustic surface should be repair flatly and smoothly in time.
4.Notice
A.When new machine is on use or replace the new electron tube, after bootstrap, pls make the electron tube warm up about 15 minutes, then put into operation, to reduce the warming up time gradually within one week, so as to promise and extend the service life of the electron tube.
B.When operation, it is prohibited to make the anode and cathode immediate contact, to avoid the work damage caused by the short circuit
C.When welding, ban to touch the electrode, conducting strip and mold, to avoid burning skins.
D.It’s the high-voltage electrode in the machine, when maintance and reparing, make sure to pull down the knife switch to ensure safety.
