(Injection machine)Being wide adaptability and precisions control property, not only it is suitable for the production of general plastic parts, but also can be suitable for the production of built-in products and electronic elements injection molding. Meanwhile we can also produce all kinds of hydraulic machine in accordance with your requirements. We will become your good “machine” for your wealth.
The whole machinery is designed and optimized by solid works three-dimensional software, and dynamic analogues movement course can make reliable analysis of forces, thus to ensure reasonable design and service life.
KMT160g/200g Plastic Vertical Injection Machine Parameter
Items of Technical Data Specification of machine | KMT160g | KMT200g | ||
Ratio of screw length-diameter | L/D | 17 | 17 |
|
Screw diameter | mm | 42 | 45 |
|
Screw speed | r/min | 10-230 | 10-230 |
|
Theoretical shot volume | cm3 | 160 | 200 |
|
Injection rate | g/s | 130 | 150 |
|
Shot weight | g | 160 | 200 |
|
Injection pressure | Mpa | 150 | 150 |
|
Clamping model | ------- | Double crank | Double crank |
|
Ejector force/stroke | mm | 60/35 | 60/30 |
|
Clamping force | kn | 900 | 1000 |
|
Max. mould plate stroke | mm | 280 | 300 |
|
Mould thickness | mm | 330 | 330 |
|
Space between tie rods | mm | 390*290 | 440*290 |
|
Mould plate size | mm | 550*450 | 550*450 |
|
Heating power | kw | 4.8 | 4.8 |
|
Motor power | kw | 11 | 11 |
|
Machine weight | T | 1.6 | 1.6 |
|
Machine dimension | m | 1.27*1.03*2.9 | 1.2*1.0*2.9 |
|
♦Two buttons single turn-on disabled protective circuit can prevent from mistaking operation of operator.
♦Skillful and small adjustable seat accompanied with the machine will make you be different from others.
♦Multi-point style integrative mechanical safe device can provide effective protection for matched die of whole course.
