Send Inquiry
| injection mould machine | Technical Data |
| Model No.: | SH60 |
| Injection unit | |
| Screw diameter: | 28mm/32mm |
| Injection pressure(Mpa): | 248MPa/164MPa |
| Swept volume: | 61g(2.0 OZ)/79g(2.8 OZ) |
| Screw L/D ratio: | 22:1/19:1 |
| Screw stroke: | 105mm |
| Screw speed: | 188.5r.p.m |
| Shot stroke: | 180mm |
| Clamping unit | |
| Clamping force: | 600KN |
| Space between tie bars: | 310mm*250mm |
| Clamping stroke: | 240mm |
| Mould thickness(Min/Max) | 125mm-300mm |
| Ejector stroke: | 50mm |
| Ejector force: | 17.5KN |
| Power/heating unit | |
| Hydraulic system power: | 14MPa |
| Pump motor power: | 5.5KW |
| Heating power: | 2.55KW |
| Temp. control zones: | 2+1 |
| Others | |
| Dimensions(L*W*H): | 29.8m*7.9m*1.43m |
| Weight: | 121T |
It is standard and conventional, boasting fast plastic injection and melting, powerful and big mould thickness and so on.
Key parts:Computer made in Hongxun of Taiwan,PLC made in Mitsubishi of Japan, proportional valve, oil pump and orient valve made in Yuken of Japan or Vickers of America and so on
