Fully automatic extrusion blow molding machine:
LHB75D | |||
Item | Unit | Parameters | |
Specifications | Max.Product Capacity | L | 6 |
Output(Cycle Time) | Pc/Hr | 300/480 | |
Machine Dimension | m | 2.2*1.7*2.2 | |
Machine Weight | T | 1.8 | |
Power | Total Power | Kw | 11.5 |
Average power consumption | Kw | 5.5 | |
Air Pressure | bar | 0.6 | |
Air Consumption | M3/min | 0.2/0.4 | |
Cooling Water Pressure | bar | 1.5/3 | |
Extruding System | Screw Diameter | mm | 45 |
Screw L/D ratio | 24 | ||
Extruder driving power | Kw | 5.5 | |
No.of Heaters | 2 | ||
Screw Heating Power | Kw | 7 | |
Output of HDPE | Kg/H | 18 | |
Single Die Head | Max Die-pin Diameter | mm | 60 |
Number Of Heating,Zone | 2 | ||
Heating Power Of Die Head | Kw | 3 | |
Double Die Head | Center Distance Of Die Head | mm | 130 |
Max Die-Pin Diameter | mm | 40 | |
Number Of Heating Zone | 3 | ||
Heating Power Of Die Head | Kw | 4 | |
Tri-die Head | Center Distance Of Die Head | mm | 80 |
Max Die-pin Diameter | mm | 35 | |
Number Of Heating Zone | Kw | 3 | |
Heating Power Of Die Head | Kw | 4 | |
Tetra-die Head | Center Distance Of Die Head | mm | 60 |
Max Die-pin Diameter | mm | 20 | |
Number Of Heating Zone | 3 | ||
Heating Power Of Die Head | Kw | 4 | |
Clamping System | Clamping Force | KN | 30 |
Platen Size | mm | 280*300 | |
Platen Opening Stroke | mm | 120-250 | |
Max Mould Size | mm | 260*300 | |
Mould Thickness | mm | 110-115 | |
