Introduction
Waste tire temperature processing production line is the method of using physical waste tires in recycling, without any pollution situation of waste tires,
it contains three raw materials, the production from 40-200 rubber powder, and put the steel fiber, waste tires, 100% of the separation of renewable resources waste tire became the "black gold".
Nylon fibers can be made of plastic products, steel wire can do spring, separation of 100% recyclable products. Thoroughly it solve the problem
of environmental pollution, waste tires, at the same time, it supplies an important way for the short rubber materials recycling.
The equipment of waste rubber exert forces, its principle is based on solid mechanics and other physical phenomena, and on the basis of the
objects that they were divided into smaller particles.
The features:
1. Compared with the traditional process, the equipment is simple and compact structure. It covers a small area and has high capacity per unit area.
2. Material selection is extensive, traditional equipment only adopts steel wire or fiber womb in a single variety production; tire greatly limits the raw material
market development. Our company equipment can includes waste rubber sole, all rubber products scraps as raw materials.
3. Equipment has low energy consumption, high ratio of investment returns and risks coefficient tall, a high degree of automation, fewer staff , only four people ,
simple operation, it effectively reduce the production cost.
4. Our company developed “normal” scrap rubber equipment, the production process, tasteless, dust-free, and without waste gas, wastes water and it fully meets the national environmental production standards.
5. It thoroughly solves the scrap tire which contained in the wire, fiber, powder, separation of 100% of the problem, and the powder fineness from 30-200 automatic allocation production.
Equipment parts have stable performance, it has long service life, convenient maintenance, and it is the replacement of traditional equipment.
Machine Name | Qty | Description | |
Host Machine | Rubber Crusher | 1 | the waste tire rubber and miscellaneous plastic pieces were breaking milling cycle |
Auxiliary Machines | Ring Cutter | 1 | using a knife to slice the tire and tire top joint, make the size of tire and tire top complete separation |
Strips Cutter | 1 | cut tires into strips the tire sidewall, tire circle reserved | |
Rim Cutter | 1 | cut tires into strips 3.5cm square block | |
Big Shaker | 1 | powder for the first time separation (8-10mesh) | |
Small Shaker | 1 | powder for the second time separation (20-30mesh) | |
Large Conveyor | 1 | used for transportation the powder which does not meet the requirement to return back to host machine for continue breaking | |
Magnetic Separator | 1 | Extract and separate mental wire from the rubber powder | |
Fiber Separator | 1 | select wool fiber from powder | |
Steel Separator | 1 | separate the crude stel mouth ring and rubber parts completely | |
Remarks |
| The above equipments constitute the complete set of scrap tire rubber powder machine. | |
Wire hoop separator | 1 | Special for extract wires in the tire’s circle | |
Fine pulverizer | 1 | Deep process the rubber powder to 40-100 mesh | |
