Chief introduction of XM-360SSS Cutting Machine

   Tank has adopted the newest generation of carbon dioxide welding, to ensure that no residual impurities within the fuel tank, no leakage and no welding slag; Welding line of tank don’t have crack, slag inclusion and broken weld defects.

   This machine has much advantage. it is a machine which run smooth, fast, high precision, easy maintenance, easy operation, low noise, no dust pollution,etc. cutting all kinds of pipe fittings with good quality and effect.

The main parameters of XM-360SSS pipe cutting machine

1. Hydraulic pressure adjusted between 15KG to 60KG per square centimeter.
2. The feed cylinder diameter is 80mm and the maximum stroke is 400mm.
3. The front feed collets cylinder diameter is 80mm and the maximum stroke is 25mm.
4. The left and right cylinder diameter is 40mm and the maximum stroke is 25mm.
5. The feed length cylinder diameter is 40 and the maximum stroke is 25mm.
6. It can cycle feeding three times.
7. Per minute blade rotating speed (low speed is 60 revolutions and high speed is 120 revolutions.)
8. The cutting speed depending on the hardness and diameter of pipe, usually, it is 20 seconds a return.