ISO/CE Certificate XQL-16 Hydraulic Cylinder Rubber Cutting Machine
Function is introduced :
1.The Rubber Cutting Machine / Rubber Cutter,It mainly used for Cutting Rubber natural rubber, synthetic rubber and other plastic materials, especially suitable for installation in the Rubber Mixer to cut small piece of rubber.
Specifications :
model | XQL-8 | XQL-16 |
Rubber cutting machine width (mm) | 660 | 1000 |
Rubber cutting machine trip (mm) | 680 | 680 |
Oil cylinder diameter (mm) | 150 | 150 |
Rubber cutting travel time (S) | 16~25 | 16~25 |
Power (KW) | 5.5 | 5.5 |
Dimensions (long x width × high) | 1900×720×2580 | 2240×720×2580 |
Weight (kg) | 1500 | 2000 |
2.the Rubber Cutting Machine is mainly suitable for cutting natural rubber, synthetic rubber and other plastic materials, especially suitable for installation in secret byMixing Mill, Cutting small piece of plastic material used.
3. This machine is mainly a Rubber Cutting Knife, frame, work oil cylinder, base, auxiliary workbench and hydraulic system, electrical system components, Rubber Cutting knife on the base with nylon pad, to protect the Rubber Cutting knife blade.
4. Cut raw rubber, the use of artificial will melt in Rubber Cutting Knife below, and then press the start button, the Rubber Cutting Knife in the piston rod driving along the frame of the track will be cut down melt.
5.frame of the up and down with two limit switch to control the reversing valve change Rubber Cutting the movement direction of the sword, and at the same time, also can protect the piston cylinder cylinder.
This bale cutter is mainly used to cut natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small pieces of rubber.
This bale cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.
