Factory customized press briquette machine for sawdust
press briquette machine for sawdust:
1.Easy to operate;
2.Environment friendly;
3.Low power equipment;
4.CE and ISO approved.
The structure of press briquette machine for sawdust
1.Hopper; 2.heat insulation cover; 3.heating circle; 4.propellers; 5.heating tube; 6.taper sleeve; 7.stents inner sleeve; 8.stents; 9.electric control
Raw Material of press briquette machine for sawdust
Forage, sawdust, straw, millet straw, wheat straw, corn straw, peanut straw, bean straw, tree leaves, cottonseed husk, cotton straw, shrubs and many other types of forest waste.
Introduction of presss briquette machine for sawdust:
1. Briquette Machine can make stick shape wood briquette of different diameter and different shape from forest wasted.
2. This Biomass Briquette Screw Press equipped with automatic temperature control system and designed to produce high density wood briquette from biomass.
3.The motor can be 11kw/15kw/18.5kw-3phase-380v-50hz electrical driven motor. This machine can be operated 16 hours per day. The extruded wood briquette can be used as fuel for briquette boilers or boilers for heating.
| Type | Power(kw) | Output(kg/h) | Inlet particle size(mm) | Dimension (m) | Inlet dimension(mm) | Weight(t) | Material humidity |
IV | 15 | 140-200 | ≤ 5 | 1.65*0.6*1.6 | 130*160 | 0.7 | ≤12% |
III | 11 | 80-150 | ≤ 5 | 1.67*0.68*1.55 | 130*160 | 0.58 | ≤12% |
Features of press briquette machine for sawdust
(1) NO binder needed during the production to make clean & green fuel briquette.
(2) Quantity of heat of final product is 500-1000Kcal, higher than raw material.
(3) Can replace firewood and liquefaction gas, with less investment.
(4) Small cubage and easy transportation.
Finished product of press briquette machine for sawdust
1.This bio-fuel briquette is 45-80mm in diameter, occurs in the hollow quadrangular or hexagonal cylinder or hollow hexagonal with a 15-20mm hole through the body.
2.The available shape: square, hexagonal, pentagon, pentagon with edge, hexagon with edge.
3.The available diameter could be: 50mm,55mm.60mm,65mm.70mm.80mm and so on.
4.The available length could be :20cm,30cm, 40cm, 50cm.
Working principle of press briquette machine for sawdust
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feeding let of briquette machine
4. Produce the briquette stick from biomass material without any additive
5. Carbonized the briquette stick
6. Complete charcoal production lines include crusher, drier, charcoal briquette machine, carbonization furnace.(The shape of briquette can be round, square, hexagonal.,etc)
