Our log saw include electrical log saw and gasoline log saw.
Our wood saw is with 400mm blade, 600mm blade and 700mm blade.
Wood saw machine can cut firewood at any length.
Log saw for sale
Fire wood saw is made by us, 9.0hp firewood saw and 13.0hp firewood saw.
Our wood log saw can be color depending on client's order.
We can consider trial order of log saw cutting machine.
We make circular wood saw at high quality and short time of delivery.
Gasoline log saw / petrol log saw include 9.0hp and 13.0hp 700mm blade.
700mm 5200w 400v 50hz log saw
pure copper motor
log holding part is useful design
professional log saw
400v 50hz ce log saw
3phase log saw
CL700A
Motor: 400v/50Hz, 5200w, 1440r/min, IP54
Cutting diameter: 30~270mm
Blade: 700*30*3mm
N.W. /G.W.: 96.50kgs/106.50kgs/1pcs
Packing size ( LxWxH): 116*90*116.5cm/2pcs
Container loading: 48pcs/20ft, 104pcs/40ft
700mm 5200w 400v 50hz log saw Operating Conditions
Machine cover is essential to minimize the injuries by flying broken blades.
Irrelevant people are not allowed in the work shop.
Flammables and explosives should be kept away from the work floor.
700mm 5200w 400v 50hz log saw Safety Measures
Wear glasses when working, to prevent from injuries by broken blades.
Watch out for your ties and sleeves. Long hair should be kept inside the cap, and no gloves are allowed during operation.
700mm 5200w 400v 50hz log saw Before Use
Ensure the machines are in good condition with no deformation and no spindle vibration, the spindle's running tolerance can h7.
Make sure the blades are not excessively worn-out, blade body has no deformation or breaks lest 700mm 5200w 400v 50hz log saw injuries occur.
Make sure appropriate saw blades are used.
700mm 5200w 400v 50hz log saw Installation
Ensure the saw blade turns in the same direction as the spindle does. If not, accidents are likely to occur.
Choose the flange whose inner diameter is the same as that of the saw blade but the outer diameter is a little larger than 1/3 (for multi-rip saw blade is 1/2) of the saw blade. Ensure the flange is clean, not over worn, bent and distorted shape.
Check the tolerance between the saw blade and the spindle. Install the flange and fasten the screw.
Be sure no people stand in front of the machine when starting the machine. Do not feed, just to check whether there is a vibration, radial or axial run out.
Saw blade reprocessing such as bore trimming or re-boring, should be finished by the factory. Poor reprocessing would lead to poor quality and may cause injuries.
While installation, the saw blade should be 5-6 teeth higher than the board surface.
700mm 5200w 400v 50hz log saw In Use
In operation wood materials should be properly fixed lest abnormal cutting occurs.
The operation must be stopped rightly once unusual nose and vibration occurs, if not, rough surface and tip-breaking many occur.
700mm 5200w 400v 50hz log saw After Use
Saw blade should be re-sharpened because dull saw blades many affect cutting effect and lead to accidents.
Re-sharpening should be made by professional factories, not changing the original teeth angle degrees.
