Main parameters: 
Material to be processed:Carbon Steel, Cold or Hot Rolled pre slit strip coils of weld able grade with max. 0.2% carbon 
Type of Production: * Round Tubes*Squar *Square and Rectangular Hollow Section 
Round Tube Outside Diameter: Min 12 Max 63mm 
Square Hollow Section: Min 10 x10 Max 50 x 50 mm 
Rectangular Hollow Section: Min 10 x 15 Max 40x 60 mm 
Tube Thickness: Min 0.5 Max 3.25 mm 
Forming Line Speed: Max 100 m/min (Square and Rectangular Hollow Shapes are produced at lower speeds depending on side to wall thickness ratio) 
Tube Cut Length: Min 4 Max 12 meter 
Length Accuracy: 3mm 
Main Drive Motor: DC 55kW * 2 
Line Composion: 
Double Mandrel Uncoiler 
Shear and TIG Welder 
Horizontal Strip Accumulator(or Cage Accumulator). 
Forming, Welding, Cooling and Sizing Section. 
Computer Flying Saw Cut-Off. 
Driven Roller Run Out Table, Inspection table Collectors. 
Solid State HIGH FREQUENCY. Induction Welder: 150 kW, Solid State(or 200kW,Vaccum Tube Type). 
Rolls: Rolls are manufactured out of AISI D3 or D2 or E52100 
Electrical Panels