Brand:Yunhai
Steel galvanized Cantilever dams, piers Climbing Formwork forretaining wall / cooling tower
1.Steel Climbing Formwork2.Cantilever formwork is used in dams, piers, retaining wall andcooling tower.
3.Surface: galvanize
Introduction: ??
Cantilever formwork is used in dams, piers, retaining wall andcooling tower etc.
The formwork can be moved freely as you request. The formworkcan be inclined backward and forward. Max. angle: 30??.
Cantilever formwork is a kind of bracket lifted by tower crane.Easy to assemble, fast to construct, safe and simple to operate,this system is really a competitive formwork system and can bringthe contractor good profit.
| ---3 ?? levels platform |
| ---All levels platform and ?? panel are connected together,lifted in one unit; |
| ---Panel can be retracted ?? 65cm, and can be inclined; |
| ---Two different platform ?? widths, two types of loadabilityplatform, meet all project requirements; |
| ---Platform width: up ?? platform, 1.2m |
| main platform, 2.4m |
| suspension platform, 1.2m; |
| --- Formwork system tie rod ?? is not necessary. Concretepouring height up to 4.0m. |
Cantilever formwork is used in dams, piers, retaining wall andcooling tower etc.
All the concrete side-pressure is borne by the anchors and thebrackets. As there is no through-wall tie-rod, the concrete is veryclean.
The formwork can be moved backward by 600mm for cleaning theformwork and fixing the reinforcing steel bar. Waler connector isused for connecting the form to ensure form alignment.
Form can be pushed to the already cast concrete by turning theadjust carriage to avoid concrete offset or leakage.
The formwork can be moved freely as you request. The formworkcan be inclined backward and forward. Max. angle: 30??.
High standard elements can be widely used.
