Brand:HG
MOQ:10
Quantity:10
NorminalPressure(MPa) | Test PressurePs(MPa) | ApplicableMedium | Workingtemperature(°C) | |||
Shell | Seal | |||||
EG41W-6 | 0.6 | 0.9 | 0.66 | W.Non-corrosionfluids | ≤100 | |
EG41J-10 | 1.0 | 1.5 | 1.1 | J.General Corrosivefliuds | ≤85 | |
G41J-10 | ||||||
EG41F-16 | 1.6 | 2.4 | 1.76 | Fs.Strong acid, alkali, and variousorganic solvents (with the exception of molten alkali metals andfluorine elements) | ≤150 | |
G41F-6 | 0.6 | 0.9 | 0.66 | |||
G41F-10 | 1.0 | 1.5 | 1.1 | |||
Installation andapply
1. Please check carefully the operatingconditions is coincide with the regulation of scope of application,and clean up inside of body, in case seal washer and other partsdamaged by waste article .
2. Do not grease rubber lining or seal washer surface, in case ofrubber swelling, affect the service life of valve.
3. It is not allowed to tie clew on the hand wheel or stem forlifting while installation, can not strike valve or screw partsarbitrary.
4. Both side of flange don’t need seal washer, all threads shouldscrew down evenly.
5. The level is not supposed to use for handle operation, in caseof key parts damaged.
6. The valve has been debugged before delivery, in case of wireconnecting error, the valve should be half opened, then switch onfor test.
7. Air resource must be provided to satisfy workingpressure.
