Full guarantee about our quality in one year
good price
excellent quality
quick delivery and response 

 

PC based diagnostic program for OPEL cars with software updated to080805

Description:
OP-COM is a PC based diagnostic program.
It covers almost all Opel cars, even new cars with CAN-BUS baseddiagnostic, such as Vectra-C, Astra-H, Zafira-B.
The program lets you to read out and clear fault codes, shows youlive data, lets you to perform output test, and supports remote,and key programming.

* The program supports many control units, like Engine,Automatic Transmission, ABS, Airbag, Engine Cooling module,Instrument Cluster, Electronic Climate Control, Body Control Unit,just to name a few examples.
* Since Opel uses many pin in the OBD connector, the diagnosticinterface works as a multiplexer, and selects the appropriate pinfor communication.
* PIN3, PIN7, PIN8, PIN12 = Serial link (ISO9141, KW81, KW82,KWP2000)
* Fault codes will be shown with all available information:
* Full fault code text description
* Full status information (Present, Not present, Intermittent)
* You can print out, save, or copy the fault codes to any otherapplication.
From the fault codes window, you can go directly to the measuringblocks window.
* The program shows you measuring block information on many controlmodule, you can choose anything from the list on your own. Theprogram is capable of showing 8 measuring block parametersimultaneously. The sample rate is depends mostly on thecommunication protocol. For example, older system, like Omega-B X25 DT Engine (ISO-9141-2) can be very slow, during communication,while newer Multec, or Bosch units are faster (using KWP-2000), andthe newest CAN based control units are very fast!

* You can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
* HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
* MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
* SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps

* You will get a feedback on the state of the activated output.This will helps you to find the failed components more easily.

* With OP-COM, you can learn keys to immobiliser, and remotekeys to the central door locking.
You can also reset, and program the following immobiliser relateditems: ECM, BCM, IPC.
You will need the vehicle security code, which can be found on theCAR-PASS.
You can also reset, and program the Service interval reminder onAstra-G, Zafira, Corsa-C, Meriva
You can code SAB6, and SAB8 airbags with the software.

* The diagnostic inteface is USB port based, so there will be NOCOMPATIBILITY ISSUES, with serial to USB converters.
The speed of the communication over the USB-BUS is enough to handlethe awesome speed of the High-Speed CAN-BUS systems, which iscurrently 500kbps. This is the main reason, why only the USB portbased interface is available for CAN-BUS.

* Compared to the TECH2, which is the dealers tool (with a 32 MBcard CANdi interface), the price of OP-COM is quite affordable.