Nitrogen Making Machines Description
1) Runoff: 500Nm3/h
2) Purity: 97-99.999%
3) Pressure: 0.65Mpa(if you need higher pressure, can add booster.)
4)ISO-9000

Technical indexes
1) Nitrogen runoff: 500Nm3/h
2) Nitrogen purity: 97-99.999%
3) Nitrogen pressure: 0.65 Mpa
4) Dew point: -45oC
5) Purification not needed, as nitrogen 99.999% purity isproduced

Principle of CMS(Carbon Molecular Sieve)Nitrogen Generations
When the process adopts lifting air, oxygen and nitrogen havedifferent diffusion rate and adsorptive capacity to separate oxygenfrom nitrogen on carbon molecular sieve. When air is compressed to0.8MPa, air source enters in pressure-swing adsorption tower forseparation after being purified through dry and oil-waterseparation process (filter). Oxygen molecules are diffused andadsorbed in carbon molecular sieve under pressure. Non-adsorbednitrogen is discharged from outlet of adsorption tower. Oxygen isdesorbed, discharged and purged in adsorption tower underdepressurization. Moreover, adsorbent can be recycled.

Main Applications of Nitrogen Generator
1. metallurgy: For anneal protection, agglomeration protection,nitrogenizing, furnace washing and blowing, etc. Used in fieldssuch as metal heating treatment, powder metallurgy, magneticmaterial, copper process, metallic mesh, galvanized wire,semiconductor, etc.
2. Chemical and new material industries: For chemical material gas,pipeline blowing, gas replacement, gas protection, producttransport, etc. Used in fields such as chemical, urethane elasticfiber, rubber, plastic, tyre, polyurethane, biological technology,intermediate, etc.
3. Electronic industry: For encapsulation, agglomeration, anneal,deoxidization, storage of electronic products. Used in fields suchas peak welding, circumfluence welding, crystal, piezoelectricity,electronic porcelain, electronic copper tape, battery, electronicalloy material, etc.

Features of Nitrogen Making Machinery
Full Automation
All systems are designed for unattended operation and automaticNitrogen demand adjustment.
Low Electric Energy Consumption
All systems are designed for Energy-Efficient.
Lower Space Requirement and Short installation period
The design and Instrumentation makes the plant size very compact,assembly on skids, prefabricated and supplied from factory.
Installation is very easy and convenient.
Fast Start-Up
Start-up time is about 30 minutes to get desired Nitrogen purity.So these units can be switched ON & OFF as per Nitrogen
Demand changes.
High Reliability
Very reliable for continuous and steady operation with constantNitrogen purity. Plant availability time is better than 98%always.
Molecular Sieves Life
Expected Molecular sieves life is more than 10-years i. e. Wholelife time of Nitrogen plant. So no replacement costs.
Simple operation and maintenance
All systems are designed by integrated solution for easy-operationand easy-maintenance.