Model No: BFC-001

I, Safety and Precautions:
1. Prohibits the use of spray gun at people and animals, or used to wash the engine, so as not to cause harm.
2. The machine uses special adapter of DC12V10.5A/AC100V ~ 220V power supply, PLS make sure before use.
3. When using the machine, PLS place the engine in the idle speed, to prevent the loss of car battery power.
4. The machine is built-in thermal protection system, a single continuous water no more than 30 minutes is appropriate.
5. After each use, it must be drained high pressure water within the high pressure pump. Relief can extend using life.
6. In winter to prevent water inside the machine ice, PLS spray water again for some time, until the water is drained.

II, Using Instruction:
Launch car engine---Plug in the power---close the door-first wet the car---then brush the car-then wash the car.
1, Open the spray gun, and empty the inside air, turn the water barrel to adjust water shape, adjust the spray nozzle to mist, wet the car body, wheels, and rinse dust on the car surface.
2, The pump membrane is anti-acid, anti-alkali, anti-chemicals. Dilution of the washing liquid, then use the machine to spray the liquid on the car in mist shape.
3. Modulate the nozzle to scattering shape, make the spray and car body in a bevel and wash the car, starting wash from top to bottom.
4. Pull out the water filter head and use our special quick connector, which can access to the tap water to supply water.
(Special note: Access to tap water, the water pressure should not exceed 4 KGS. )

III, Teconology Specifications:
CW-DC12V-024-1
(1), power: 25W
(2), voltage: DC12V
(3), current: 10.5A
(4), water flow: 3.5-6.5L/min
(5), pressure: 145PSI
(6), Gross Weight: 6.5/7(kg)

V, Select Accessories:
(1) special adapter of power supply
(2) water quick connector
(3) double clip battery cable

VI, General Troubleshooting:
Trouble: The machine doesn't work.
No water from spray gun or pressure be smaller.
Gun leaking, pump quick head connector leaking Reason Poor connection of power plug, fuse is damaged, car cigarette lighter has thermal protection.
Gun hole is blocked.
Filter is blocked.
Round filter O-ring aging
Ring is damaged.
Quick changing head O-ring is changed.
Solution
After checking, re-plug the power cord, replace the 10A fuse, after cool for 5 minutes then re-insert to use.
Remove the nozzle and wash
Scrub the filter
Replace O-ring
Replace the ring
Replace quick change head O-ring

VII, Accessories:
(1) A large ring of O-type water in filter. A little O-ring of water out,
(2) a special filter wrench, and one fuse.
(3)Dual battery connector

VIII, Schematic diagram:
Before each use, PLS check high-pressure pump whether the hose is normally no damaged, paying particular attention to wires and filters. Insert the two ends of water out hose into the high-pressure water pump and spray gun connector.
Insert the plug into the cigarette lighter socket. (Cigar lighter)
The high-pressure pump will automatically run, and in the standby ready to use. Different water-jet mode can turn the rubber regulator of water gun.

Tank capacity: 16L,
Water pipe length: 7M;
Water pressure: 4KG;
Net weight: 2.25 Kg
Voltage: 12V
Packing Size: 380x300X330mm
Container: 735PCS/20FT; 1510PCS/40FT; 1730PCS/40HQ

Products features:
1, 16L big tank capacity.
2. The unique design of replaceable brush strips;
3, imports soft bristles/bush with self-cleaning function;
4, double-sided copper nozzle, with larger water spraying surface;
5, Stagger brush, clean more thoroughly;
6, 12V car power supply
7. Car washer body can be used as storage box and mat for standing when washing.
8. Standard equipped with 3 m lighter line, and 7M water Pipes, then we can wash you can on 10 M distance.