2,Test Euro III, IV,V Engine.
3,Test Bosch,DENSO, Delphi..
4,DRV Clogging Warning
Brief Introduction
1. APEX-708 B adopts full-automatic control.
2. It can perform maintenance test of Euro III, Euro IV,Euro V injector and high-pressure pump conveniently.
3. It can test hundreds of kinds of injector andhigh-pressure pump including BOSCH, SIEMENS, DELPHI, DENSO,Caterpillar etc. with complete experimental data.
4. This test bench, integrated with original importedhigh-precision flow sensor, has functions: automatic measurement ofoil quantity and automatic generation of fuel pump nozzlemaintenance report etc..
Configuration:
APEX-708 B
Main motor | Energetic OX, People (11kw,15kw) |
Converter | QMA, LK |
Standard common rail fuel pump | Original CP3 or CP1H |
Standard fuel rail | Original with DRV fuel rail |
Low pressure hose | imported APH heat-resisting and high tensile oil tube |
Injector sensor | High-precision gear flow sensor |
Pump sensor | High-precision gear flow sensor |
Display | Brand new HD 23 inch LED display |
Industrial Motherboards | Industrial Intel Platform |
Filter | Euro III Special Filter |
Temperature Control System | Efficient and intelligent heating and cooling group |
Injector test
- Equipped with Bosch original imported CP3 pump andhigh-pressure fuel rail with DRV, can drive 6- cylinder solenoidvalve and Piezoelectric injector, to carry out injector testunder different working conditions
- Can select number of injector cylinder to carry outautomatic measurement cylinder by cylinder, test bench RPM,Automatic steering control, and automatic rail pressure regulation,maximum up to 2000Bar, can stabilize within 10Bar, and can measureoil amount and generates report automatically.
- After comparing experimental data of hundreds of kinds ofinjectors, it can automatically judge the injector to be tested isgood or not via reports.
- All injector drive channels have short circuit protectionfunction.
Fuel pump test
- Can drive different kinds of high-pressure pumps like BoschCP1/CP2/CP3, Delphi CRSP, Denso HP3/HP4, Siemens DCP and Denso HP0pump.
- Test bench RPM, Automatic steering control, Automatic railpressure regulation, the maximum can reach 2000Bar,can stabilizewithin 10Bar, and can measure oil amount and generates reportautomatically.
- After comparing experimental data of hundreds of kinds ofinjectors, it can automatically judge the injector to be tested isgood or not via reports.
- All high pressure pump drive channels have short circuitprotection function.
Affiliated features
- DRV clogging automatic warning function, will save agreat amount of usage expenses for you.
- Have data backup, system software update and data upgradefunctions.
- With tens of accessories convenient installation test fordifferent types of injectors and high-pressure pumps isensured.
Technical Parameters:
Working Voltage | 220V / 380V |
Output Power | 11~15 KW |
Rail Pressure Range | 0~2000 Bar |
Rail Pressure Control Accuracy | ±0.5 MPa |
Fuel Pump Rotation Speed | 0 ~ 4000 RPM |
Diesel Filter Accuracy | < 5 U |
Injector Sensor Range | 0.1 mL - 600 mL |
Injector Sensor Accuracy | 0.1% |
Pump Sensor Range | 10 mL - 3000 mL |
Pump Sensor Accuracy | 0.5 % |
Dimension | 198 * 84 * 150 ( cm ) |
Net Weight | 680 KG |
