Heat-Resistant Anticorrosive Coatings -- H61-150 Heat-ResistantAnticorrosive Coatings (Primer/Topcoat, 2K)

Component: Phenolic modified epoxy resin, heat-resistantanticorrosive pigments/fillers, additives, curing agents, andsolvents, etc. Two-component (A and B) package forprimer/topcoat

Application: Long-distance pipeline for heat/gas transmission

Properties: Good adhesion and flexibility, quick drying, goodworkability, excellent resistant to boiling water, heat ageing,acid, basic and salt, good heat resistance enabling long serviceunder 150º C condition, two-component package, component B isgeneral curing agent for primer/topcoat.

Physical Parameter: Color: Primer: Brown, Topcoat: Red brown
Specific Gravity: Approx. 1.10 kg/L
Theoretic Dosage: 0.12 kg/m2
Flash Point: 36º C
Drying Time: 25± 2º C, Dust-Free: ≤ 1 h, Hard Drying: ≤ 24 h
Storage: 1 year
Film Thickness: WFT: 120μ M DFT: 50μ M

Application Parameter: Formula Ratio: Primer: Component A:Component B (curing agent) = 100: 5~7
Topcoat: Component A: Component B (curing agent) = 100: 6~8
Curing Time: 23º C, 15~30 min
Pot Life: 23º C, 6h
Coating Method: High-pressure airless spray, hand brushing, rollcoating
Diluent/Dilution Ratio: Primer: Diluent only for H61-150 primer
Topcoat: Diluent only for H61-150 topcoat, < 5%
Coating Interval: 25º C, Min. 24 h, Max. 7 d
Surface Treatment: Sand blasting must be made on surface of steeltill qualified to SA 2.5 Standard of Sweden.
Recommended Layers: 1 layer of high-pressure airless spray, 50μ MDFT; Followed by 2 layers of topcoat, 80~100μ M DFT

Claim: The data in this Specification is derived from experimentsand practical applications, and can be regarded as a guide forapplication. The title product is only for specialty application.Otherwise we only guarantee the quality of the said coating itselfif it is used in other sectors undescribed herein or freshsectors.