Brand:Changhan Machinery
MOQ:1
Quantity:1
H30-5NC High Precision copy warping machine
H30-5NC High Precision copy warping machine support Φ30 ×21-inch and Φ21 × 21 inch beam warping
Technical parameters:
Line speed | 0~1000m/min |
Yarn tension | 0~500N |
Braking torque | 1600NM |
Beam up and down | Pneumatic control |
Beam loose and tight | Pneumatic control |
Speed Roller diameter | 120mm |
Main Motor Power | 7.5KW |
Main motor control | PLC control inverter |
Monitoring methods | Touch-screen computer-controlled real-time monitoring |
Positive let-off roller diameter | 100mm |
The way of positive let-off rolle | PLC Control 3KW AC servo control system for high-speed |
The pressure of gas source | 6 bar |
The mainparts:
inverter | Emerson EV2000 Series |
Touch Screen | Taiwan Eveiw |
Control components | Fuji |
Pneumatic components | AirTAC Taiwan AirTAC |
PLC | Omron CP1H Japan Series |
Detection devices | Autonics |
High-speed detection device | Koyo |
Pressure detection component | YSC |
Operation components | Schneider |
Bearing | NSK |
Terminal Blocks | PHOENIX |
Main Motor | SIEMENS |
Package configuration:
H30-5NC warping head,roll back,Positive tensionroller,Damaged Yarn Detector (South Korea),Blowing Detector,Automatic oiling device,Staticeliminator.
Technical characteristics:
1.Copy-specific features make the lap, the number of meters and circumference of every beam the same in the same group, a fewmeters of error under the same number of laps is not morethan 10 meters, perimeter error does not exceed ± 2 mm, effectivelyavoided because beam circumference of inconsistency arising fromthe volume of non-uniform off and it will make the waste of yarn toa minimum.
2.The preservation of the unique function of theoriginal data set to avoid the number of beam less than the samegroup because of the shortage of raw materials.
3.Main motor is controlled by the inverter, the digital pulse isstable and reliable PLC based closed-loop command to ensure thefast, slow winding back winding and reversing constant speed.4.Thebeams up and down is controlled by pneumatic, and positioningcombined with a high degree by the photoelectric switch PLCintelligent control, automatic beam according to the location ofdifferent diameter, without artificial selection5.Tailstock iscontrolled by pneumatic, the bearing uses the section type bearing, making automatic centering bearing within the first hole of thefirst disk to minimize damage6.The main braker uses pneumatic discbrake, the hollow disc brake is good at heat dissipation, withautomatic compensation and tips clamp and the brake shoe,stability, and life has been greatly improved7.The positive andspeed roller brake at different speeds according to (200 m / min ormore), with different voltage to match the brake master brake firstwhen braking achieved with the constant tension and the yarn isbasically the same.8.Electrical parts use Japan and Omronprogrammable CP1H Series Eveiw touch screen 5.7 inches, andoperation of all electrical fault error messages can be displayedon the touch screen (in both Chinese and English can beautomatically switched on request). Pneumatic components use Taiwan AirTAC, soft air medium through the PLC to issueinstructions to complete the accurate mechanical parts of thevarious actions required.9.Positive let-off roller coating coatedhigh hardness, high surface finish on the yarn are greatly improvedadhesion, positive let-off roller driving force comes from theexchange of high-speed servo system with the PLC matching systemwith the main winding , compensation and other affected by thespeed of the tension arising from fluctuations in yarn tension sothat the same are Constant.10.Remote debugging can becarried out to monitor the status of current work, as well as faultconditions.H30-5NC Warping Machine
