ITEMS

CW61140 /CW62140

CW61160/ CW62160

Max. swing over bed

Ø1400 mm

Ø1600 mm

Max. swing over carriage

Ø1060 mm

Ø1260 mm

*Over gap

Ø1930 mm

Ø2110 mm

Width of bed

970 mm

*Effective length of gap

590 mm

Max. length of work piece(two centers)

1.5m/2m/3m/4m/5m/6m/8m/10m/12m

Max. turning length

1.3/1.8/2.8/3.8/4.8/5.8/7.8/9.8/11.8m

Max. Weight of work piece(between centers)

6000Kg

Spindle nose

A2-15

Spindle bore

Ø130

Cone hole diameter and taper of spindle hole

Metric Ø140 1:20

Number of speeds

24(normal)???12(reverse)

Spindle speed scope

2.5~250rpm

Pitch of longitudinal ball screw/diameter

12 mm/ Ø70

Number of cross feeds

97

Feed range of tool post for per rev. ofspindle(Longitudinal)

0.1~12 mm/r

Feed range of tool post for per rev. ofspindle(Cross)

0.05~6 mm/r

Feed range of tool post for per rev. ofspindle(middle tool post)

0.025~3 mm/r

Rapid feed for Axis Z

3740 mm/min

Rapid feed for Axis X

1870 mm/min

Rapid feed for Axis middle tool post

935 mm/min

Thread cutting for Metric pitchthreads(range/no.)

1~120 mm/45

Thread cutting for Whit-worth pitch threads(range/no.)

30~1/4 TPI/42

Thread cutting for Module threads(range/no.)

0.5~60 mm/64

Thread cutting for D.P. threads(range/no.)

1/2~60DP/48

Vertical distance from spindle center to installing basis

51 mm

Size of tool shank

50×50 mm

Max. travel of cross slide

840mm

900mm

Swing angle of tool post

±90°

Max. travel of middle tool post

400 mm

Max. travel of top slide

200 mm

Tailstock taper of bore

Metric 80

Tailstock sleeve travel

300 mm

Tailstock sleeve dia.

Ø160 mm

Power of main motor

22 KW

Rapid feed motor power

1.5 KW

Power of cooling pump

0.15 KW

3m Overall dimensions(L×W×H)

6100×2080×2130mm

6100×2130×2300mm

Net weight(3m)

14100Kg

15100Kg

Note : The items with “*” are only for 62series.
For each additional machine length of 1m, there will be additionalnet weight of 1300kg