Simple design to achieve automatic blowing and cardingsystem  

1 appication

 This is mainly an upgrade of cotton feeding form intraditional carding machines.

The machine is equipped to the gear of carding machine. With thehelp of blowing machines, materials as received from blowingequipment will be fed into carding machine through the pipe whilearrives chute feeder.

 It can achieve continuous and automatic production

2 application illustration :

Traditional machine processingline see as below:

Our updation of above machine arrangement

we have 3 different new updation plan for you

just for illustration ------plan A

3 What you can achieve from our machine:

$  Low investment , big return , economizedcost

      Normally the amountof money needed to invest a regular cotton blowing and carding unitwith 10,000 spindle production is about 3,000,000 RMB (about $468,750).

        However, withthe help of QTM’s upgrading plan, to achieve same amount ofproduction , it only needs around 500,000 RMB (about $ 78,125). Youcan still remain your former blowing equipment and equip with sixto eight cards then naturally change your former production lineinto a simple blowing and carding combination production line,which greatly economize your former units and save yourcost.

$ Easy upgrading , little effect onproduction

Step 1   Preparation

One day

Step 2   Installation(including mechanical andelectrical part)

One or two days

Step 3   Completion (Commissioning and production)

One or two days

$Under the same yield of production of one tonnage, traditionaltechniques consumes 762 KWH., while the upgraded simple B & Ccombination unit consumes 655 KWH, 14% decrease than the former. Inthis way, power saved each year accumulates to 258,000 KWH, and137,000 RMB (about $21,406 ) electric charge can be saved. . (powerrate: 0.53 RMB per KWH )

$FB171A Feeding Chute , initially designed by QTM with aspecial developed PLC control system, adopts pressure sensorimported with original packaging from USA in bottom chute toguarantee accurate pressure detection in which way stable pressurecan be achieved to continuously output tight and uniform layers. Itsolves the problem of connecting broken laps and stabilizes CB(L)of lap within 2%.

Machine detail picture:

our service for you

Fast and first class customer service and support comes with allour products and guarantees optimal performance of the QTM machinesover the years.

Our skillful and well experienced service team, they know whichline you are in, they know what you are using, they know what youneed, wherever you are, they will reach you with fast and firstservice.

They will do field survey and pilot test and find out what’sbest for you from former design to later upgrading, installationand commissioning .

What you do is just trust us and we will give you a key tosuccess and profit.

During our cooperation, you will also enjoy our value addedservices with incomparable advantages like information consultation, personnel training, future machine upgrading etc,

SPINNING COTTO FEEDING HOPPER AND CARDING MACHINE